7-35x56mm
Shipping calculated at checkout
Designed & Built for Heavy Field Use by Professional Marksmen
Description
The all-new Tangent Theta TT735P, 7-35x56mm Rifle Telescope is the latest release in our line of extreme-range precision sighting instruments for professional marksmen.
This 35x rifle optic delivers better positive target identification at distance with increased magnification, features the ability to parallax down 10 meters and is 24mm shorter than our 25x models, all benefits to the Extreme Long Range and Precision Rifle Series marksman. The TT735P includes Tangent Theta’s legendary elevation and windage turrets that deliver precise tactile response and feature a truly TOOL-LESS RE-ZERO® procedure and lockable diopters.
Tangent Theta rifle telescopes are built in Canada and are specifically designed and function-tested for long lifecycles in the harshest of environmental conditions.
Key Features
- 56mm objective lens
- 36mm main tube
- Will focus down to 10 meters
- Eleven reticle illumination settings
- Side parallax adjustment
- TOOL-LESS RE-ZERO® feature (US Patent # 10,591,253)
- Non-translating knobs with elevation zero-stop
- Double-turn elevation with rev indicator
- 7-35x magnification range
- Lockable rapid adjusting diopter
Reticle Details
- Tremor3 Reticle
- Gen 3XR Fine Reticle
- JTAC Reticle
Features & Specs
Specifications
| Magnification | 7x-35x |
| Length | 405mm |
| Width | 103mm |
| Height | 86mm |
| Weight | 1230g |
| Tube diameter | 36mm |
| Objective bell diameter | 65mm |
| Objective lens diameter | 56mm nominal |
| Eyepiece diameter | 48mm |
| Reticle options | Gen 3 XR Fine, JTAC, Tremor3 |
| Field of View @ 7x | 3.1 degrees (5.41m @ 100m) |
| Field of View @ 35x | 0.62 degrees (1.08m @ 100m) |
| Diopter range | -3 to +2.5 |
| Eye relief | 90mm |
| Exit pupil @ 7x | 8mm |
| Exit pupil @ 35x | 1.6mm |
| Re-zero mechanism | TOOL-LESS RE-ZERO® (patent pending) |
| Elevation Total Range | 30 mrad |
| Windage Total Range | 14mrad |
| Elevation Working Range | 28 mrad |
| Windage Working Range | +/- 6 mrad |
| Adjustment resolution | 0.1 mrad |
| Parallax adjustment range | 10m to infinity |
| Crosshair illumination | LED, 11 settings |
| Battery type | DL2032 3v lithium |
| Exterior finish | Type II Anodized, matte |
| Waterproof: | 4 hours @ 10 meters |
| Shockproof: | 700g's @ 10,000 cycles |
| Standard accessories: | Tenebraex lens covers & ARD |
FAQ
Q. Why do I have illumination issues with my Tremor3 or H59 reticle?
A. Due to licensing agreements with Horus, we are limited in what we can illuminate to only the center dot and (on the Tremor3) the 2, 4, 6, and 8 MRAD dot below the horizontal crosshair. Our illumination module is also designed to limit stray light emissions from the front of the scope, which means that illumination on the Horus reticles we offer is optimized for use in low light and clip on night vision. As such, you may not be able to see the illumination with the naked eye during the day.
Q. What rings should I use?
A. We mostly use Badger Ordnance and Cadex Defence mounts here, but any high end mounting solution will work well for you as long as you take care to follow the torque guidelines set out in the instructions.
Q. What is the torque spec when installing my Tangent Theta scope?
A. For our TT525 and TT315 'P' series scopes (34mm tube) we recommend up to 25 in/lbs. For our TT315M & LHR (30mm tube) we recommend 15 in/lbs.
Q. What is the warranty for my TT?
A. We offer a lifetime warranty against manufacturer defect, and we conduct all warranty and non-warranty repairs at our facility here in Halifax. The same people who built your scope will be the ones to look after it in the unlikely event it needs any work done.
Q. How do I clean my scope glass?
A. First, use a soft brush or cloth to remove any dirt or grit. Then use either the microfiber end of the included lens pen or a quality microfiber cloth to clean the lens. Use a circular motion, working from the inside to the outside.
