3-15x50mm Long Range Hunter
Shipping calculated at checkout
Designed & Built for Heavy Field Use by Professional Marksmen
Description
Introducing the new Tangent Theta model TT315LRH 3-15x50mm Rifle Telescope. The Long Range Hunter is a variable power telescopic rifle sight that can be rapidly adjusted for ballistic and environmental corrections by means of externally calibrated adjustment dials. The reticle is situated in the first focal plane, allowing reticle subtentions to remain constant over all magnification ranges.
The rifle telescope consists of a single piece main tube that encloses the optical components. All mechanical adjustments of the sight are controlled by the elevation and windage mechanisms at the top and right side of the tube. Illumination and parallax are controlled by the dial on the left side of the telescope tube. Magnification may be adjusted by the fluted ring forward of the eyepiece and diopter settings may be made at the rear of the eyepiece.
The device incorporates a 50mm objective lens and 32mm eyepiece, which provide excellent image quality in low light levels. It also provides for rapid target acquisition and identification at short, intermediate, and long ranges. The sight incorporates an LED for reticle illumination under low light conditions. The reticle consists of a cross hair with auxiliary stadia lines and dots to assist in shooting at various ranges.
Every TT315LRH ships with a set of Tenebraex flip covers included
FEATURES
- Rapid Access Elevation and Windage
- Auto Isolation Feature (AIF) Learn More
- Locking rapid adjust diopter
- Rev indication on Elevation
- Low profile parallax (side adjust and Illumination control)
- No field of view occlusion in shooting position
- Single piece tube
- Includes Tenebraex flip covers
- Includes battery cap tool
Reticle Details
- MRAD Reticle
- MOA Reticle
MRAD Reticle
MOA Reticle
Features & Specs
| Total Elevation | Working Elevation | Total Windage | Working Windage |
|---|---|---|---|
| 18.4 MRAD (63 MOA) | 11.7 MRAD (39 MOA) | +/- 6 MRAD ( +/- 21 MOA) | +/- 2.8 MRAD (+/- 9.5 MOA) |
FAQ
Q. Why do I have illumination issues with my Tremor3 or H59 reticle?
A. Due to licensing agreements with Horus, we are limited in what we can illuminate to only the center dot and (on the Tremor3) the 2, 4, 6, and 8 MRAD dot below the horizontal crosshair. Our illumination module is also designed to limit stray light emissions from the front of the scope, which means that illumination on the Horus reticles we offer is optimized for use in low light and clip on night vision. As such, you may not be able to see the illumination with the naked eye during the day.
Q. What rings should I use?
A. We mostly use Badger Ordnance and Cadex Defence mounts here, but any high end mounting solution will work well for you as long as you take care to follow the torque guidelines set out in the instructions.
Q. What is the torque spec when installing my Tangent Theta scope?
A. For our TT525 and TT315 'P' series scopes (34mm tube) we recommend up to 25 in/lbs. For our TT315M & LHR (30mm tube) we recommend 15 in/lbs.
Q. What is the warranty for my TT?
A. We offer a lifetime warranty against manufacturer defect, and we conduct all warranty and non-warranty repairs at our facility here in Halifax. The same people who built your scope will be the ones to look after it in the unlikely event it needs any work done.
Q. How do I clean my scope glass?
A. First, use a soft brush or cloth to remove any dirt or grit. Then use either the microfiber end of the included lens pen or a quality microfiber cloth to clean the lens. Use a circular motion, working from the inside to the outside.
